Steps to Perform Netgear WNDR4500 Setup

The Netgear WNDR4500 router will support 450Mbps on both the 5GHz and 2.4 GHz bands. With this, you will get the great range of reliable and speed internet connection to experience a hassle-free gaming and streaming services.

Once the Netgear setup is completed then you need connect it to printer and wirelessly meet the printing requirements. The Netgear router setup will open a wide range of wireless communication features of router as it will allow to further change the router settings by using the router management console. Carefully read the web page to know how to login to Netgear router and learn about effective troubleshooting methods.

How to Perform Netgear WNDR4500 Router Login?

Check out the steps to perform Netgear router login and for this, router need to physically connected.

f:id:mark-watson:20220223212503p:plain

Phase 1: Configuring Netgear WNDR4500 Router

  1. Start by disconnecting the cables connected to computer and then switch on modem first.
  2. Here, connect one end of an Ethernet cable to modem and the other end into internet port of the router.
  3. After that, connect router to computer by plugging one end of Ethernet cable to computer’s LAN port and other to any of the Ethernet ports of the router.
  4. Switch on router and make sure that power lamp is on.

 

Phase 2: Logging into Netgear WNDR4500 Router

  1. Start by connecting the router to computer and then open your web browser.
  2. After that, enter routerlogin.com or 192.168.1.1 from the browser address bar and choose to enter.
  3. Lastly, enter the default router username and password. Here, you will find the details at the back or bottom of the router.

These are the steps that users need to follow to smoothly perform Netgear router login process properly.

Steps to Perform Netgear WNDR4500 Setup

Check out the steps as mentioned and know about the steps to perform Netgear router login password:

  1. Proceed to log into Netgear router by using appropriate login credentials.
  2. Now, tap to security and then services.
  3. Choose to add after configuring the settings for every port.
  4. Tap to security > firewall > LAN WAN rules.
  5. Tap on add under the outbound services to smoothly create the rules for Outbound services.
  6. Proceed to security > firewall > advanced.
  7. Disable SIP-ALG.
  8. Tap to apply and then choose security > bandwidth profile and add VOIP bandwidth profile.

These are the steps that you need to follow to perform Netgear WNDR4500 setup process.

Summing Up

Check out the steps as mentioned above and know about router login Netgear steps. If you face any other query like Netgear router password change then follow the steps properly to avoid any issue.